BMW K bikes (Bricks)

You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


suzukii

suzukii
New member
New member
Hi everyone,

I have done something to my K100 and need some help

ground not to the starter relay (From pin #11)

Problems with starting  "ground not to the  starter relay" 2012-110

    

Inge K.

Inge K.
VIP
VIP
Welcome Suzi!

The relay is grounded at hall sensors via the ignition ECU.

It`s been a couple of hall sensor issues her lately,
which causing the starter to turn off-on-off-on.
To verify try to ground hall sensor negative connection, pin 3 at ignition ECU.

Earlier it was a couple of issues where ground was permanently lost,
which was solved by changing the ignition ECU.


__________________________________________________
Inge K.
K100RS -86. (first owner), K1100LTSE -94.
    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum