BMW K bikes (Bricks)


You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   Standard fork spacing tube 1987 KRS Empty Standard fork spacing tube 1987 KRS Sun Dec 09, 2012 1:36 am

JR_K100RS

JR_K100RS
Life time member
Life time member
G'day All ,
I was thinking about putting my stock fork springs back into my bike , went through the parts bin & I found the 4 springs ( my bike had the divided spring with a spacing tube ) but I'm missing 4 of the plastic spring bearings ( the plastic end bit for each spring half ) and both of the spacing tubes , I can fabricate the spacing tubes if I knew the correct length , from memory they were approx 100mm , anybody know ? , also if anyone has a few spring bearings I could buy that would also be splendid .

my model details are 1987 KRS with brembo fork , I read through the repair manual online for the forks , image 24931038 in the fork section has the details

Thanks in advance

JR

Melbourne Australia


__________________________________________________
Diamond Grey ( 617 ) 1987 K100RS ( European Delivery ) Original owner
    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum