BMW K bikes (Bricks)


You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   Inflating a tubeless tire Empty Inflating a tubeless tire Thu May 05, 2016 8:57 am

BooG

BooG
Platinum member
Platinum member
I have been at it for two hours, and the thing will not inflate!Evil or Very Mad
Got it on the rim no prob....just can't inflate it!
Have seen the luggage strap method, and the starter fluid method online (don't fancy that one).
Any easy fix? Going to the tire shop seems defeatist!!!!

    

2Back to top Go down   Inflating a tubeless tire Empty Re: Inflating a tubeless tire Thu May 05, 2016 9:04 am

Rick G

Rick G
admin
admin
A CO2 canister will usually do the trick.


__________________________________________________
"Man sacrifices his health in order to make money.
Then he sacrifices money to recuperate his health.
And then he is so anxious about the future that he does not enjoy the present; the result being that he does not live in the present or the future; he lives as if he is never going to die, and then dies having never really lived."   Dalai Lama


Bikes 1999 K1100 LT with a Big Block 1200
    

3Back to top Go down   Inflating a tubeless tire Empty Re: Inflating a tubeless tire Thu May 05, 2016 9:56 am

JGT

JGT
Platinum member
Platinum member
I hold the wheel vertical and bounce it on the ground. Pushes the side walls onto the rim, bit of fairy liquid helps.  john


__________________________________________________
1992 K75
    

4Back to top Go down   Inflating a tubeless tire Empty Re: Inflating a tubeless tire Thu May 05, 2016 10:28 am

BooG

BooG
Platinum member
Platinum member
Still at it! Bead won't sit in one side, and now I am covered in fairy liquid at can't grip anything. Can't believe its this difficult. I've done it before with no issues..why now...why me....why.....4th hour...I'm gonna get that sukkkka!!Inflating a tubeless tire 61740

    

5Back to top Go down   Inflating a tubeless tire Empty Re: Inflating a tubeless tire Thu May 05, 2016 12:08 pm

88

88
Life time member
Life time member
You need a really big compressor and an extra pair of hands one to inflate and support the wheel whilst you hold the bead "shut" by pressing it sideways (well more at an angle seated side down) off the floor .


__________________________________________________
Inflating a tubeless tire Ir-log1188....May contain nuts!Inflating a tubeless tire Ir-log11

"The world is a book and those who do not travel read only one page." - St. Augustine from 1600 years ago & still true!

K1 - 1989 - AKA Titan (unique K1/K1100RS hybrid by Andreas Esterhammer)
K1100RS - 1995. AKA Rudolf Von Schmurf (in a million bits)
K100RS - 1991 AKA Ronnie. Cafe racer project bike
K75RTP - 1994
K75C - 1991 AKA Jim Beam. In boxes. 
K1100LT 1992 - AKA Big Red (gone)
K100LT - 1988 - AKA the Bullion brick. Should never have sold it.
    

6Back to top Go down   Inflating a tubeless tire Empty Re: Inflating a tubeless tire Thu May 05, 2016 12:09 pm

Two Wheels Better

Two Wheels Better
Moderator
Moderator
I was fitting a Tourance Next to my RT's front wheel the other day and couldn't get a section of the bead to seat no matter what I tried. That is, until I broke the bead again on the one side that wouldn't seat, rubbed some more tyre paste round the rim and bead, and hit the bastige with a 50 psi blast! It slowly moved towards the rim as I held the valve tight to the stem and with a loud pop, seated. Sometimes it's good to simply break the bead again until the tyre sits more roundly on the rim.

It's also important to leave the Schrader valve out of the stem for maximum air ingress until it's seated to your satisfaction. Replace and refill to spec. Dunno if that'll help you but this was my technique.


__________________________________________________
1977 R75/7-100, '93 K11/K12 Big Block, '95 R100 Mystic, '96 K1100RS, '98 K1200RS, '06 K1200R & '09 K1300GT. Projects: 1993 & '96 K1100RS, & 1st '98 K1200RS.
The Mystic, Big Block, 2nd K1200RS, K12R & K13 are running & ridable.
    

7Back to top Go down   Inflating a tubeless tire Empty Re: Inflating a tubeless tire Thu May 05, 2016 1:03 pm

BooG

BooG
Platinum member
Platinum member
Paid a bloke to do it. £3, 3mins...50psi....yeah, you need a compressor!!! 
I'm still amazed by the "fire" technique....!!Laughing

    

8Back to top Go down   Inflating a tubeless tire Empty Re: Inflating a tubeless tire Sat May 07, 2016 5:06 pm

BooG

BooG
Platinum member
Platinum member
Full marks for perseverance!! Watch this for some tire inflation entertainment. Fast forward the first bit....! What a Face

    

9Back to top Go down   Inflating a tubeless tire Empty Re: Inflating a tubeless tire Sat May 07, 2016 7:25 pm

BooG

BooG
Platinum member
Platinum member

    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum