BMW K bikes (Bricks)

You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   fuse layout Empty fuse layout on Sat Sep 28, 2013 8:07 pm

michaellaw

michaellaw
active member
active member
hi every body hope you's all enjoyed the rally last week and every one got hope safe and sound does anyone know the layout of the fuse box on a k1100lt I blew the third one from the bottom and the bike just died in motion it would wind over but not fire so I pinched one out of the bottom and it started ok and I rode home 15 k without a hassle I blew the top one before that (temp and fuel gauges) ive obviously got a problem I suspect is my break light switch but a fuse lay out will help trak it down.just like a knife sales man but wait theres more on the right hand side of the bike behind the side cover there is a plug with two green wires going in and two brown wires the two brown wires have been bridged and if you undo them it wont start but will spin over.the bike is ex police and who ever had the job of decommissioning it must have been in a hurry mick

    

2Back to top Go down   fuse layout Empty Re: fuse layout on Sat Sep 28, 2013 8:42 pm

Inge K.

Inge K.
VIP
VIP
Fuse #3 from bottom (#8 from top) is for the stereo and map reading light,
and should not cause the bike to stop when it blows.
Your bridged brown wires is most likely for the sidestand switch.


__________________________________________________
Inge K.
K100RS -86. (first owner), K1100LTSE -94.
    

3Back to top Go down   fuse layout Empty Re: fuse layout on Sat Sep 28, 2013 8:49 pm

RicK G

RicK G
VIP
VIP
I can't help with a fuse box layout Mick, I have been looking for some time and will have to figure it out myself one day when the bike is in bits.
However I can confirm the hurry that is used when ripping the parts of a police bike, I have even seen wires just snipped and left bare seems so long as it doesn't go up in smoke they dont care.


__________________________________________________
"Man sacrifices his health in order to make money.
Then he sacrifices money to recuperate his health.
And then he is so anxious about the future that he does not enjoy the present; the result being that he does not live in the present or the future; he lives as if he is never going to die, and then dies having never really lived."   Dalai Lama


Bikes 1998 K1100 LT, 1993 K75 RT, 1996 K75RT, 1986 K75 GS, 1979 Z1300 Kawasaki
    

4Back to top Go down   fuse layout Empty Re: fuse layout on Sat Sep 28, 2013 8:52 pm

RicK G

RicK G
VIP
VIP
@Inge K. wrote:Fuse #3 from bottom (#8 from top) is for the stereo and map reading light,
and should not cause the bike to stop when it blows.
Your bridged brown wires is most likely for the sidestand switch.
Have you got a complete list of which fuse is which Inge it will save me heaps when I get to finishing the complete colour circuit diagram.


__________________________________________________
"Man sacrifices his health in order to make money.
Then he sacrifices money to recuperate his health.
And then he is so anxious about the future that he does not enjoy the present; the result being that he does not live in the present or the future; he lives as if he is never going to die, and then dies having never really lived."   Dalai Lama


Bikes 1998 K1100 LT, 1993 K75 RT, 1996 K75RT, 1986 K75 GS, 1979 Z1300 Kawasaki
    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum