BMW K bikes (Bricks)

You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   Relay Box fitments - all K Series Empty Relay Box fitments - all K Series Sat Dec 21, 2013 6:02 am

George R

avatar
active member
active member
Can anyone tell me what is the purpose of the tower in the centre of the relay box on a K series bike? There does not seem to be any reason for it being there.
 
Does anyone know different, because I could find a use for that space!

Thanks in advance

    

duck

duck
Life time member
Life time member
Mounting spot for OEM add-on relays - like for driving/fog lights.


__________________________________________________
Current stable:
86 Custom K100 (standard fairing, K75 Belly pan, Ceramic chromed engine covers, paralever)
K75 Frankenbrick (Paralever, K11 front end, hybrid ABS, K1100RS fairing, radial tires)
86 K75C Turbo w/ paralever
94 K1100RS
93 K1100LT (x2)
91 K1
93 K75S (K11 front end)
91 K75S (K1 front end)
14 Yamaha WR250R
98 Taxi Cab K1200RS
14 K1600GT
http://www.ClassicKBikes.com
    

George R

avatar
active member
active member
I see - I connected my relays near to the items they operate some time ago, so this 2 relay space is redundant.  I took a dremel and cut this tower thing off level with the floor of the box, then filled the hole with 2 part epoxy filler.  The big area I revealed was ideal to fit a Centech auxiliary fuse box.  The wiring system is now much tidier,and the aux fuses DRY. 

regards

    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum