BMW K bikes (Bricks)

You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


Oliverinlux

Oliverinlux
active member
active member
http://www.ebay.com/itm/41423-Honda-CBR125-R-2004-Fuel-Level-Sender-/300892601958?pt=UK_Motorcycle_Parts_13&hash=item460e98be66&vxp=mtr


will keep posted. I am going to try this as it looks as though it should fit perfectly and will give the more normal ohm reading that can be read by aftermarket speedometers such as acewell and KOSO

    

Inge K.

Inge K.
VIP
VIP
And the wires for the fuel pump?


__________________________________________________
Inge K.
K100RS -86. (first owner), K1100LTSE -94.
    

Oliverinlux

Oliverinlux
active member
active member
Ha I should be able to work it out. I think Ill be able to incorporate it all together even if a little fabrication will be necessary. Ill be doing a tank swap soon and that will be when I experiment. Im actually going to use a sender off of the zx-14 ninja because they have the closest reading of resistance I need. Ill keep you posted

    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum