BMW K bikes (Bricks)


You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   Top yoke dimensions. Empty Top yoke dimensions. Thu Jul 31, 2014 5:21 am

greenhorn

greenhorn
active member
active member
Morning all.

does anyone happen to know the vital statistics of the K100 top yoke?

Stanchion diameter is 41.3mm. That's common knowledge. I've managed to find one reference online to the fork centres being 190mm apart but nothing to confirm that. And I've not found anything at all for the offset.

Cheers in advance.

Rich.

    

2Back to top Go down   Top yoke dimensions. Empty Re: Top yoke dimensions. Thu Jul 31, 2014 6:31 am

Inge K.

Inge K.
VIP
VIP
greenhorn wrote: And I've not found anything at all for the offset.
56 mm.


__________________________________________________
Inge K.
K100RS -86. (first owner), K1100LTSE -94.
    

3Back to top Go down   Top yoke dimensions. Empty Re: Top yoke dimensions. Thu Jul 31, 2014 6:34 am

greenhorn

greenhorn
active member
active member
Crackin', many thanks.

Are you able to confirm the fork spacing of 190mm as well?

    

4Back to top Go down   Top yoke dimensions. Empty Re: Top yoke dimensions. Thu Jul 31, 2014 6:44 am

Inge K.

Inge K.
VIP
VIP
190 mm is correct.

I'm assuming we're speaking about the Fichtel & Sachs fork as you did mention 41,3 mm as dia.


__________________________________________________
Inge K.
K100RS -86. (first owner), K1100LTSE -94.
    

5Back to top Go down   Top yoke dimensions. Empty Re: Top yoke dimensions. Thu Jul 31, 2014 6:51 am

greenhorn

greenhorn
active member
active member
Inge K. wrote:190 mm is correct.

I'm assuming we're speaking about the Fichtel & Sachs fork as you did mention 41,3 mm as dia.


I didn't even have to duck as that went over my head.

I've no idea even what a Fichtel and Sachs fork is. The bike is a 1984 K100 RS and I have no reason to suspect it doesn't have standard forks fitted. It definitely has 41.3mm stanchions though as my 41mm clip ons were a "snug" fit. 

you are a man with much knowledge Mr Inge. Thanks.

    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum