BMW K bikes (Bricks)

You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


Life time member
Life time member
BMW doesn't sell the FLS float as a separate part so if yours floods then you are SOL or left with improvising. Saw this on FleaBay and bought one to see if it would work.

Omix-ADA 17729.01 

Results: The base diameter is a little wider than OEM but it does fit in a K bike FLS. It has a larger volume and is taller so your fuel gauge might not register totally full when it hits the tank at the top.  It is also a bit more bouyant which means it may give slightly more optimistic readings than the OEM "ping pong ball."

About $8 shipped on FleaBay in the US.

Current stable:
86 Custom K100 (standard fairing, K75 Belly pan, Ceramic chromed engine covers, paralever)
K75 Frankenbrick (Paralever, K11 front end, hybrid ABS, K1100RS fairing, radial tires)
86 K75C Turbo w/ paralever
94 K1100RS
93 K1100LT (x2)
91 K1
93 K75S (K11 front end)
91 K75S (K1 front end)
14 Yamaha WR250R
98 Taxi Cab K1200RS
14 K1600GT

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum