BMW K bikes (Bricks)


You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   OH Boy!!!  Empty OH Boy!!! Sat May 23, 2015 3:00 pm

svlwolf

svlwolf
active member
active member
OK,  I have 3-small rubber washers and 2-Large rubber washers with a groove all the way around them, I then have a metal bushing (its not the one for the brake lever ) I have no idea where these go, any ideas

OH Boy!!!  20150524


__________________________________________________
1985 K100RS amidst customization bounce


OH Boy!!!  Usa-lo10
    

2Back to top Go down   OH Boy!!!  Empty Re: OH Boy!!! Sat May 23, 2015 3:32 pm

Inge K.

Inge K.
VIP
VIP
OH Boy!!!  Linjal10


__________________________________________________
Inge K.
K100RS -86. (first owner), K1100LTSE -94.
    

3Back to top Go down   OH Boy!!!  Empty Re: OH Boy!!! Sat May 23, 2015 5:24 pm

Two Wheels Better

Two Wheels Better
Moderator
Moderator
Nice fabric! What is that pattern?
Wink


__________________________________________________
"Politics is the entertainment division of the military industrial complex."
- Frank Zappa
1977 R75/7-100, '93 K11/K12 Big Block, '93 K1100RS, '95 R100 Mystic, '96 K1100RS, 2 x '98 K1200RS, '06 K1200R & '09 K1300GT
    

4Back to top Go down   OH Boy!!!  Empty Re: OH Boy!!! Sat May 23, 2015 9:04 pm

svlwolf

svlwolf
active member
active member
Thanks for the compliments on the bed spread :king:

The length of the bushing is 25mm, Outside Diameter is 14mm, Inside Diameter is 8.40mm

The Large Rubber Outside Diameter is about 26.5mm the inside diameter is 10.14mm and 5.45mm thick

The small Rubber Outside diameter is  16.9mm the inside diameter is 6.3mm and 2.80mm thick


__________________________________________________
1985 K100RS amidst customization bounce


OH Boy!!!  Usa-lo10
    

5Back to top Go down   OH Boy!!!  Empty Re: OH Boy!!! Sat May 23, 2015 10:12 pm

bushyintas

bushyintas
Silver member
Silver member
Rear ducktail fairing mount , sandwiches the fiberglass where it bolts to the frame, inside where the tool box lives under the seat.

Bushy.


__________________________________________________
Bushy

k100 RT 1988 #0095723
K100 RT 1984 into Custom Single seat.  #0024503
    

6Back to top Go down   OH Boy!!!  Empty Re: OH Boy!!! Sun May 24, 2015 1:07 am

Holister

Holister
Life time member
Life time member
Do you mean this?

Large Gromet #11 on the seat hinge bracket
OH Boy!!!  B0012396

Small gromet #3
OH Boy!!!  B0012382


__________________________________________________

1989 K100RT     VIN  0097367 (naked)  
1996 K1100RS   VIN  0451808
 OH Boy!!!  Austra12    Fuel:  95 Octane
Engine Oil: Nulon Full Synthetic 15W50
Gear Box Oil:  Nulon Synthetic 75W90
    

7Back to top Go down   OH Boy!!!  Empty Re: OH Boy!!! Sun May 24, 2015 4:01 am

k-rider

k-rider
Life time member
Life time member
the steel bushing could be from a rubbermounting for  a foot peg plate


k-rider


8Back to top Go down   OH Boy!!!  Empty Re: OH Boy!!! Sun May 24, 2015 4:13 am

TacKler

TacKler
Life time member
Life time member
Further to what Bushy mentioned, the two larger "rubbers" are in the ducktail at the rear.  They are located just in front of the rear brake light and are sandwiched in between the bracket which holds the rear wheel mudguard in place (from underneath).  Should have a penny washer on top and a 10mm lock nut will hold it all together.  The rubber is more of a vibration damper. 

It is also necessary to loosen these two nuts if you wish to remove the rear plastic registration plate fitted below the rear brake light.  There are also two self tapping screws here holding it up snug.  Might want to check they are firm.

Hope this helps.

Dave.


__________________________________________________
Red 1991 K75S
    

9Back to top Go down   OH Boy!!!  Empty Re: OH Boy!!! Sun May 24, 2015 4:15 am

Inge K.

Inge K.
VIP
VIP
#13.


OH Boy!!!  Skjerm10


__________________________________________________
Inge K.
K100RS -86. (first owner), K1100LTSE -94.
    

10Back to top Go down   OH Boy!!!  Empty Re: OH Boy!!! Sun May 24, 2015 4:17 am

Inge K.

Inge K.
VIP
VIP
k-rider wrote:the steel bushing could be from a rubbermounting for  a foot peg plate

Could also be the silencer mount.


__________________________________________________
Inge K.
K100RS -86. (first owner), K1100LTSE -94.
    

11Back to top Go down   OH Boy!!!  Empty Re: OH Boy!!! Sun May 24, 2015 4:19 am

TacKler

TacKler
Life time member
Life time member
Thanks Inge.


__________________________________________________
Red 1991 K75S
    

12Back to top Go down   OH Boy!!!  Empty Re: OH Boy!!! Sun May 24, 2015 3:02 pm

svlwolf

svlwolf
active member
active member
Inge K. wrote:
k-rider wrote:the steel bushing could be from a rubbermounting for  a foot peg plate

Could also be the silencer mount.


Inge K., BINGO bushing goes in the silencer mount!


__________________________________________________
1985 K100RS amidst customization bounce


OH Boy!!!  Usa-lo10
    

13Back to top Go down   OH Boy!!!  Empty Re: OH Boy!!! Sun May 24, 2015 3:20 pm

svlwolf

svlwolf
active member
active member
I also assume this is what 11 and 12 would be on the parts diagram?

OH Boy!!!  20150525


__________________________________________________
1985 K100RS amidst customization bounce


OH Boy!!!  Usa-lo10
    

14Back to top Go down   OH Boy!!!  Empty Re: OH Boy!!! Sun May 24, 2015 8:51 pm

Dai

Dai
Life time member
Life time member
Looks right to me!


__________________________________________________
1983 K100 naked upgraded to K100LT spec after spending time as an RS and an RT
1987 K100RT
Others...
1978 Moto Guzzi 850-T3, 1979 Moto Guzzi 850-T3 California,1993 Moto Guzzi 1100ie California
2020 Royal Enfield Bullet 500
    

15Back to top Go down   OH Boy!!!  Empty Re: OH Boy!!! Tue May 26, 2015 6:24 am

bushyintas

bushyintas
Silver member
Silver member
Thanks Inge +1 from me.


__________________________________________________
Bushy

k100 RT 1988 #0095723
K100 RT 1984 into Custom Single seat.  #0024503
    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum