BMW K bikes (Bricks)


You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down    K11RS ABSII on Thu Mar 03, 2016 9:58 am

Reg

avatar
Silver member
Silver member
Guys

Wou8ld anybody have a step guide to bleeding the brakes on a K11rs, especially where to start on the ABSii unit. ??

    

2Back to top Go down    Re: K11RS ABSII on Thu Mar 03, 2016 12:26 pm

duck

avatar
Life time member
Life time member
1) Modulator
2) Caliper

On the front master:

Turn steering to full lock left to get the master mostly level.

If you leave the lid off when bleeding then you need to pull the brake lever in V-E-R-Y slowly. If you pull it in too fast you will get a little fountain of brake fluid that may get on your bike.

Probably not a bad idea to put some paper towels under the front master while bleeding it.


__________________________________________________
Current stable:
86 Custom K100 (standard fairing, K75 Belly pan, Ceramic chromed engine covers, paralever)
K75 Frankenbrick (Paralever, K11 front end, hybrid ABS, K1100RS fairing, radial tires)
86 K75C Turbo w/ paralever
94 K1100RS
93 K1100LT (x2)
91 K1
93 K75S (K11 front end)
91 K75S
14 Yamaha WR250R
http://www.ClassicKBikes.com
    

3Back to top Go down    Re: K11RS ABSII on Fri Mar 04, 2016 7:41 am

Reg

avatar
Silver member
Silver member
sorted.. thanks, purchased a hose with non return valve.. the right tool for the right job..

    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum