Hope iv got this right ,so here goes,Moriarti is the name got my first bike when i was 9 years old,that is 65 yrs of mad bad and happy biking.My collection of metal pins plates etc is extensive ,but the smile is still there.Ihope i can be of use to members .Happy Days.

Welcome too. If you have a lot of metal plates and pins you need to be careful. Some of the guys have a charismatic and magnetic personality so you could be well attracted to the forum. Hopefully you are not rusty behind the ears.

Nice to have you on board too, do you get to travel much? We do sort of like occasionally to meet up and you will find everyone very helpful so don't be afraid to ask questions.

Howdy.

Do you happen to own a K bike?

@moriarti wrote:Hope iv got this right ,so here goes,Moriarti is the name got my first bike when i was 9 years old,that is 65 yrs of mad bad and happy biking.My collection of metal pins plates etc is extensive ,but the smile is still there.Ihope i can be of use to members .Happy Days.

Thanks for your kind replies .Just to let you all know,My bike is a 1984 K100rs i have owned it for 21yrs ,Wind Rain Sun and Sand.Never Ever Let me down maintained by me we are fixed at the hip so to speak .Im crap with computers just waiting for another lesson from one of the Grandkids, easier to rebuild the K thats for sure.

I added one of those two weeks ago! Nice one.

Welcome Moriarti  

Good to have a granny here, makes me feel young again  


Had my share of cracking bikes and bones lately, but got my second bike and got up again.
Keep the shiny shit to the sun, and those black things hit the road!

@Arlina wrote:Keep the shiny shit to the sun, and those black things hit the road!

Never a truer word was said

Welcome!

@92KK 84WW Olaf wrote:I added one of those two weeks ago! Nice one.

Hi Olaf Hope you are not too busy to help, just been for a run on the Brick,Left hand indicator/flasher wont cancel most upsetting any ideas as to the problem,cheers 

Welcome along Moriarti - it's taken you a few years to find the forum, but hopefully, you will be glad you did.

Left indicator won't cancel - sticky switch? The buttons do build up a certain amount of grime which can make them stick on and the contacts are prone to a little corrosion (which usually makes them not work) on this damp little island we call home. 

Easy enough to check/fix - a single philips head screw holds the left hand switch block onto the clutch lever assembly. Remove that and you will have access to the inner workings of the switch unit to be able to remove & clean the buttons and clean up the contacts. Top tip - place a shoe box under the switch gear before you start dismantling to catch those small screws and springs that will make a bid for freedom.

Good luck

P.S. Plates and pins just increases our scrap value and makes us harder to burn.