BMW K bikes (Bricks)


You are not connected. Please login or register

K100-forum.com » Technical, repair and troubleshooting » Bep to breakout box b to motoscope pro

View previous topic View next topic Go down  Message [Page 1 of 1]

1Back to top Go down   Bep to breakout box b to motoscope pro Empty Bep to breakout box b to motoscope pro Tue Jan 12, 2021 10:37 am

nicmarshall46

nicmarshall46
New member
New member
Does anyone have experience wiring a Bep to breakout box b to motoscope pro? Any advice or diagrams would be greatly appreciated!

    

jweaverak

jweaverak
New member
New member
I have done this configuration with a 1985 K100.  Here is my diagram (updated to show motoscope pro direct connection to ignition coil for rpm)

http://forum.kforum-tech.com/members-upload/uploads/K100_Wiring_Di_(1).pdf



Last edited by jweaverak on Thu Mar 24, 2022 10:27 am; edited 2 times in total (Reason for editing : (updated to show motoscope pro direct connection to ignition coil for rpm))

    

View previous topic View next topic Back to top  Message [Page 1 of 1]

K100-forum.com » Technical, repair and troubleshooting » Bep to breakout box b to motoscope pro

Permissions in this forum:
You cannot reply to topics in this forum