BMW K bikes (Bricks)


You are not connected. Please login or register

K100-forum.com » Member's introduction » Hi all,Gordon needs help

View previous topic View next topic Go down  Message [Page 1 of 1]

1Back to top Go down   Hi all,Gordon needs help Empty Hi all,Gordon needs help Sun Jun 09, 2013 2:26 pm

Gordon Smith

Gordon Smith
Silver member
Silver member
Although adjusting "choke" cable to its best position, it still only moves the throttle bar less than 1\2 a mill. I have studied the Haynes manual down to 4 inches square and hung on a string in the little room. NO success. Nearest BMW dealer 70 miles away. Have all the tools but need to know how. Gordon

    

2Back to top Go down   Hi all,Gordon needs help Empty Re: Hi all,Gordon needs help Sun Jun 09, 2013 3:46 pm

Inge K.

Inge K.
VIP
VIP
Welcome Gordon!
You find a service bulletin about this subject at the portal, look under K75 (# 2227).


__________________________________________________
Inge K.
K100RS -86. (first owner), K1100LTSE -94.
    

3Back to top Go down   Hi all,Gordon needs help Empty Re: Hi all,Gordon needs help Sun Jun 09, 2013 3:52 pm

92KK 84WW Olaf

avatar
Life time member
Life time member
Gordon,

Welcome from across the sea.....Any problems everyone will help....

92KK


__________________________________________________
1992 K100LT 0193214 Bertha Blue 101,000 miles
1984 K100RT 0022575 Brutus Baja Red 578 bought 36,000 now 89,150 miles
1997 K1100LT 0188024 Wotan Mystic Red 689 58,645 now 106,950 miles Deceased.
1983 K100RS 0011157 Fricka 606 Alaska Blue 29,495 miles Damn K Pox Its a Bat outta Hell Now 58,200 miles. 
1996 K1100LT 0233004 Lohengrin Mystic Red 38,000 miles currently 48,061 miles.
1983 K100RS 0004449 Odette R100 colours 58,000 miles. Sprint fairing now 61,190 miles

Past:
1968 Yamaha 80 YG1
1971 Yamaha 125 YAS-1
1968 Honda 125 SS
1970 Honda CD 175
1973 Honda CB500-4
Honda CX 500
    

4Back to top Go down   Hi all,Gordon needs help Empty Part missing? Sun Jun 09, 2013 4:29 pm

ibjman

ibjman
Life time member
Life time member
I recently scrapped out a K75 & noted that the "choke" cable on the throttle body end utilizes a spacer washer.
Could yours be missing? Part #14 in the illustration:
Hi all,Gordon needs help B0000310

    

5Back to top Go down   Hi all,Gordon needs help Empty Re: Hi all,Gordon needs help Sun Jun 09, 2013 4:41 pm

Inge K.

Inge K.
VIP
VIP
Part #14 goes under the switch for the "choke" warning lamp.


__________________________________________________
Inge K.
K100RS -86. (first owner), K1100LTSE -94.
    

6Back to top Go down   Hi all,Gordon needs help Empty Thanks Inge K. and all others. Sun Jun 09, 2013 5:18 pm

Gordon Smith

Gordon Smith
Silver member
Silver member
.It is the movement of the arm that the cable is connected to that is getting lost and as you cant see round the barrel I cant see how the long movement is getting lost. Although I'm getting full movement at the cable and the arm it is attached to, it is as though the other side has dropped back a quarter turn an is still moving but not cming up far enough to operate the throttles------ Any ideas?

    

7Back to top Go down   Hi all,Gordon needs help Empty Re: Hi all,Gordon needs help Sun Jun 09, 2013 5:52 pm

Inge K.

Inge K.
VIP
VIP
Haven't experienced any problems with this mechanism, won't be that much help.
It's a cam plate between cyl. 3 & 4, could be that it have becoming loose on the shaft?


__________________________________________________
Inge K.
K100RS -86. (first owner), K1100LTSE -94.
    

8Back to top Go down   Hi all,Gordon needs help Empty I sent Sun Jun 09, 2013 8:06 pm

ibjman

ibjman
Life time member
Life time member
I sent Gordon a PM with detail photos of the part.
Like INGE says.....something could actually be coming apart? like the cam follower (roller?) on the throttle shaft could be worn through???? Or the inner lever loose damaged
Gordon may have to remove the air filter box to get a better look see
Regards......ibj...

    

9Back to top Go down   Hi all,Gordon needs help Empty Re: Hi all,Gordon needs help Sun Jun 09, 2013 9:08 pm

Rick G

Rick G
admin
admin
There is a small roller on the cam plate and has a screw in the centre. I have seen them come lose and fall of which causes exactly the problem you have. If you are lucky the roller will be in the muck that gathers on top of the engine.


__________________________________________________
"Man sacrifices his health in order to make money.
Then he sacrifices money to recuperate his health.
And then he is so anxious about the future that he does not enjoy the present; the result being that he does not live in the present or the future; he lives as if he is never going to die, and then dies having never really lived."   Dalai Lama


Bikes 1999 K1100 LT with a Big Block 1200
    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

K100-forum.com » Member's introduction » Hi all,Gordon needs help

Similar topics

-

» New member

Permissions in this forum:
You cannot reply to topics in this forum