BMW K bikes (Bricks)


You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   Aeroflow Screens Empty Aeroflow Screens Wed Aug 20, 2014 3:42 am

floyd

floyd
Life time member
Life time member
Can those that have an Aeroflow Screen fitted to their RS please give a bit of feedback?

I have seen one Aussie bike in some pics here somewhere with one fitted. Not sure who's

Wondering if they got it from the USA or an Aussie distributor? 


Aeroflow Screens Side

They have a tall one which I would love to see a pic of.


__________________________________________________
K100 with lots of K1100 bits - mongrel of a thing...
    

2Back to top Go down   Aeroflow Screens Empty Re: Aeroflow Screens Wed Aug 20, 2014 3:47 am

Stan

Stan
Life time member
Life time member
I have a tall tinted one on my Rt from Screens For Bikes.


__________________________________________________
1983 K100 basic vin 0003960 colour red  GONE
1987 K100RT vin 0094685 colour, orange peel, sorry, pearl..GONE
F800R black
    

3Back to top Go down   Aeroflow Screens Empty Re: Aeroflow Screens Wed Aug 20, 2014 12:28 pm

k-rider

k-rider
Life time member
Life time member
i had one for my RS , just sold 2 days ago, it is a good quality , but you need to buy the right size, i am 1.92m , and was recomended to buy the smallest size, by the dealer here in DK  ,  Mad ,if you are over 1.83m ,according to there homepage , you will need the largest of the 2.

the problem for me was that i had a LOT of noise from turbulence  directly in the helmet.

hope this helps. Very Happy 


k-rider


4Back to top Go down   Aeroflow Screens Empty Re: Aeroflow Screens Wed Aug 20, 2014 6:59 pm

floyd

floyd
Life time member
Life time member
k-rider wrote:i had one for my RS , just sold 2 days ago, it is a good quality , but you need to buy the right size, i am 1.92m , and was recomended to buy the smallest size, by the dealer here in DK  ,  Mad ,if you are over 1.83m ,according to there homepage , you will need the largest of the 2.

the problem for me was that i had a LOT of noise from turbulence  directly in the helmet.

hope this helps. Very Happy 


k-rider


Thanks mate. I am 186cm. Will certainly get the large if I do get one. Shipping from the States is most likely going to rule it out for me though....


__________________________________________________
K100 with lots of K1100 bits - mongrel of a thing...
    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum