1
Handlebar Size... Wed Feb 04, 2015 3:57 pm
bettyswolloks
active member
Hey all, can I use 7/8th size bars on the K or do they have to 22mm?
Message [Page 1 of 1]
1
active member
2 Re: Handlebar Size... Wed Feb 04, 2015 6:35 pm
Snod Blatter
Life time member
They have to be 22mm otherwise your switchgear won't fit 
__________________________________________________
1989 K100RS SE ABS 8v VIN: 0149214
Others: 1.5 x CBX250RS-E, '94 CB250, '95 TRX850, '16 Z250SL, '01 R1100GS
3 Re: Handlebar Size... Wed Feb 04, 2015 7:40 pm
robmack
Life time member
You can use 7/8" if you sand off the chrome layer where the controls go. Or you can enlarge the hole on the controls but then they will not fit 22mm bars again. Better to do the former than the latter.
__________________________________________________
Robert
1987 K75 @k75retro.blogspot.ca
4 Re: Handlebar Size... Thu Feb 05, 2015 2:54 pm
bettyswolloks
active member
Thanx for that Chaps, I thought as much on both your reply's, just needed confirmation from other peeps 
The journey continues........
The journey continues........
5 Re: Handlebar Size... Sat Apr 25, 2015 5:02 am
bettyswolloks
active member
Did a little of both. The bars where powder/plastic coated so I sanded them back to the wood, and got the dermal on the switchgear. The biggest issue was the throttle, had to mill out a couple of points to get a nice smooth action. The clutch side needed nothing but a spirited approach to fitting 
6 Re: Handlebar Size... Sat Apr 25, 2015 5:10 am
92KK 84WW Olaf
Life time member
bettyswolloks wrote:Did a little of both. The bars where powder/plastic coated so I sanded them back to the wood, and got the dermal on the switchgear. The biggest issue was the throttle, had to mill out a couple of points to get a nice smooth action. The clutch side needed nothing but a spirited approach to fitting
Wood? Wood the bike work now?
__________________________________________________
1992 K100LT 0193214 Bertha Blue 101,000 miles
1984 K100RT 0022575 Brutus Baja Red 578 bought 36,000 now 89,150 miles
1997 K1100LT 0188024 Wotan Mystic Red 689 58,645 now 106,950 miles Deceased.
1983 K100RS 0011157 Fricka 606 Alaska Blue 29,495 miles Damn K Pox Its a Bat outta Hell Now 58,200 miles.
1996 K1100LT 0233004 Lohengrin Mystic Red 38,000 miles currently 49,200 miles.
1983 K100RS 0004449 Odette R100 colours 58,000 miles. Sprint fairing now 63,390 miles
Past:
1968 Yamaha 80 YG1
1971 Yamaha 125 YAS-1
1968 Honda 125 SS
1970 Honda CD 175
1973 Honda CB500-4
Honda CX 500
7 Re: Handlebar Size... Sat Apr 25, 2015 6:13 am
Mossy1200
Platinum member
I have 7/8 ally clip-ons on mine and had to do a lot of bar sanding. Very time consuming.
Message [Page 1 of 1]
K100-forum.com » Technical, repair and troubleshooting » Frame, fairing and wheels » Handlebar Size...
Similar topics
Permissions in this forum:
You cannot reply to topics in this forum
|
|
|
