BMW K bikes (Bricks)

You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down    K75 injector wiring on Sat Aug 18, 2018 9:35 am

edmundf

avatar
active member
active member
Hi all,

I am hoping you might be able to answer this quick question. I have replaced most of the wiring on my K75 project. Where the plugs go on the injectors there is a random loose wire. It may have had a terminal on it?. I checked to see if there was contunity with ground or voltage. Nothing. Does anyone know where this wire connects to the bike?

Picture uploading seems disabled for me so here is a Google drive Link to the offending wire

https://drive.google.com/file/d/1rKujKu3HSsf2jr3zC5zcCXDJ2EkmnLX1/view?usp=drivesdk


Thanks
Ed

    

2Back to top Go down    Re: K75 injector wiring on Sat Aug 18, 2018 9:57 am

RicK G

avatar
VIP
VIP
Its a brown wire so it goes to ground. There is a 6mm threaded hole between 2-3 cyl injectors on the head (the lower mount for the fairing also uses it) look down just behind the fuel rail and use a 6M bolt about 10mm length and tightens to about 8ft/lb


__________________________________________________
"Every normal man must be tempted, at times, to spit upon his hands, hoist the black flag, and begin slitting throats." from Mencken's 1919 Prejudices

Bikes 1993 K1100 LT, 1998 K1100 LT, 1993 K75 RT, 1996 K75RT, 1986 K75 GS, 1979 Z1300 Kawasaki X 2 for now
    

3Back to top Go down    Re: K75 injector wiring on Sat Aug 18, 2018 10:02 am

edmundf

avatar
active member
active member
H Rick,

Thanks for the quick reply!. I was not sure as I was not seeing contunity with anything.

    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum