After a bit of searching I managed to get hold of the fly screen that fits to the headlight shroud on the naked k100. What didn't come with it were the fittings to attach it to the shroud.

Does anyone have them and would be willing to sell or could someone photograph their existing ones??

I'm sure I can cobble something together, I'd just like to see what the originals looked like. It's not clear in the line diagram of the flyscreen kit.

Thanks

George

Thanks Inge K, perhaps I should have studied the drawing a little more closely.

Reckon if I can obtain the plates at #4 and perhaps part number 8 which I assume is a 'jig' to drill the holes in the right place. Ive already got the requisite screws and washers.

Update:
Okay this is going to be tricky, I can only locate these parts in the US and one supplier (parts.bmw-ducati.com) wants a minimum order of $9999 before they will process international parts with a value of $10.26, ECS tuning want $100 for shipping to the UK although in fairness their price for the parts only come to $8.56.

Any thoughts??


Cheers

George

Hi Fentible, this is not a great photo but it might help. Photo is inside the headlight shell arrangement with it laid forward with flyscreen attached.

I don't think it would be too difficult to fabricate some new brackets that would do the job. Note that mine only had the threaded clips in two of the four screw locations and I don't know how the original factory attachment was set up. 

Would you be interested in a US resident address for purchasing purposes, then re-shipping them from that address (mine) to you in the UK?

Are you certain the usual suspects in the UK (James Sherlock, Motorworks or Motobins) haven't got them? I can post some pictures tomorrow with some measurements, but basically they have used a steel strip to bolt against instead of having the nut ride against the fairing part. Building off the force with some larger washers will achieve the same.

Renez, thank you for the photo, although it was on the basis that I would have to cobble something together to fit the screen I bought, its helpful to see how it fits inside the shroud.

However IngeK's post indicates that the plates (item #4 in the 2nd post) are still available, even better, so is the template which will take any guesswork out of drilling into my headlight shroud. 

When searching part numbers the only results came up from US suppliers. I also specifically tried, albeit unsuccessfully, searching the part numbers in all the well known UK suppliers. I will try actually ringing them on Monday.

Brickrider, as ever, I am blown away by the kindness of forum members to help others out. I am extremely grateful for that kind offer and if none of the UK suppliers can help on Monday I'll give you a shout. I'll try and confirm first that the parts are actually available and not just showing up as residual entries on their database 
I remember searching for the screen kit online a while ago and it showed up on one of the US suppliers website. I didn't know how quickly to press the 'pay now' button. Unfortunately after several weeks I got an email apologising that the item was out of stock and no longer available. Strangely, shipping costs were a very reasonable $40 so I'm not sure why they are now so unreasonable and for a couple of parts that could be sent in an envelope.

Thank you all again for taking the time to reply

As above, there are people here that can help out with shipping cost. I'll take that picture later (ready for F1 now :-) )

What am I thinking!! I'm flying out to Florida on Thursday for 3 weeks!! I can simply have them sent out to our address out there!!

Now why didn't I think of that??

Brickrider, if for any reason that doesn't pan out I'll be in touch.

Cheers all

George

Promises, promises, I know:

" />

" />

Hope this helps. Where are you going in Florida?

Brilliant photos, thanks ReneZ and if the worst comes to the worst they shouldn't be too difficult to fabricate.

Flying into Orlando international, staying in Davenport. Last holiday with the offspring before they fly the coop. The wife and I are hoping to head down the Tamiami trail to Naples for a few days and explore the Everglades.

I'm sure BMW uk will get you the parts you need
This site On Line Parts lists the items you want.

46632300145   JIG   £ 2.61

46632300147  Plate  £3.21 each


 Although a tad more expensive and delivery starting at an extortionate £6.53 for the first Kilo, it's rather cheaper than going out of country

I have the large screen like new the fork brackets and the arms for both sides .
Not for sale but if your up this way at some point your welcome to have a look or I can take a snap of all bits and show as soon as I can descale my pictures which is being a pain 

I'd really appreciate that Jlm, I am seriously considering a large screen,but it comes without any mounts.
Upside of that where did you get your screen , did it come with the mounts?

 

jlmk100 wrote:I have the large screen like new the fork brackets and the arms for both sides .
Not for sale but if your up this way at some point your welcome to have a look or I can take a snap of all bits and show as soon as I can descale my pictures which is being a pain 

I think this is a different item to the one I have. But thanks for the offer.

The postman, thank you for that link. I've never seen that website before, it might be convenient but they are double the US price (if I can get it delivered to my holiday Villa) and charge a £5 low order fee. I detest business's that do that and unfortunately I've nothing else to order at the moment.