Wanted....2 cogs that go in the odo/trip meter part of the instruments......metric...km per hour speedo.
I replaced a whole set in one bike last year and this summer in mild temperature...32 C the gears are "gluing" themselves together. Has any one got the following and are willing to part with them...
The two upper most...closest to the single primary gear.....16/44 teeth and 34/40 teeth.
The bloke I bought the set from prefers to sell sets only and I found out that the other two cogs...closest to the body of the speedo have no wear at all. It seems a waste to get a set.

Found these, are they any good to you? One on left is no good missing a tooth.

Hopefully this guy can help you out. He sells them individually. Hope it's what you need.
Odometergears.com

that seems to be the most common failure waz

did rt  get a couple of gears one time from a local supplier ....Penrith agent for odo gears seems to ring a bell ...just from memory

Waz...the one in the middle could work. I have found the smaller ones closer to the speedo tend not to be affected by heat. I have got onto a bloke called Richard who sells the cogs and he will sell them individually at $25 each plus $9 to send. I suppose that isnt too bad for about 30 years of use.
Should have mentioned before...the cogs I replaced last year are fine..in red bike...now the same type of problem in the orange bike.

PM me your postal address and I will send these to you