After a recent repair on my 10/83 K a grommet holding the side panel decided that it no longer wanted to be part of a legend and departed. I got hold of some other grommets, but they seem to be too thick or thin or whatever. Can anyone point me in the right direction where I can get new grommets?

munich motorcycles in wa
great to deal with and got parts to my door in 24hrs and i am in orange nsw

Check Moto-bins, Motorworks and Sherlocks (all UK based) as well.

Prices are cheaper even posted from the UK compared to Munich Motorcycles. But they can take a week or so to get to my door.

Thanks very much so far. I have tried Clarks Rubber, but just not the right size.

Try using a round Head screw(metal), works perfectly for me.

Just go to the dealer, they're not that expensive.

Have ordered some through Munich Motorcyles about $1 each. Thanks.

did you order the tubular sleeve as well ?? was a considerable difference between the new ones and original

Tony

The tubular sleeve was mounted from -86 models on.

Inge K.

Mines 85 manufacture date and has the sleeve hmmm another Ozzie first ??

Tony

The production year starts in september, for the next years models.

Inge K.

OK fellahs, what tube?

rubber tube attaches to frame for bottom part of side cover to mount up to

Tony

Below is the Rubber tube attached to the frame...



Below is the Grommet/tube unattached..



Part number 6 is the one that i have in the photo... I will be damned if the one that is currently supplied will fit on the end, I got mine from motobins...

That was the original design.

Now that explains why I have clear plastic tubing on the the rods. I assumed that the previous owner had put it there to prevent paint rub. He had put rubber strips between the fuel tank and adjacent panels so as to decrease rubbing over rough roads. We learn a little more about the K.