BMW K bikes (Bricks)


You are not connected. Please login or register

K100-forum.com » K bike Pictures » Removing engine from the frame..which size socket?

View previous topic View next topic Go down  Message [Page 1 of 1]

gabriel

avatar
Platinum member
Platinum member
Hi everyone

Does anyone know which size socket to use to remove the screws located at the front of the engine and frame.
The screws on my bike are the ones which are included with the engine protection bars and have an unusual shaped head.

Thanks

    

92KK 84WW Olaf

avatar
Life time member
Life time member
Try photo. Could they be big Torx heads? Mine if I remember are Allen Key.


__________________________________________________
1992 K100LT 0193214 Bertha Blue 101,000 miles
1984 K100RT 0022575 Brutus Baja Red 578 bought 36,000 now 89,150 miles
1997 K1100LT 0188024 Wotan Mystic Red 689 58,645 now 106,950 miles Deceased.
1983 K100RS 0011157 Fricka 606 Alaska Blue 29,495 miles Damn K Pox Its a Bat outta Hell Now 58,200 miles. 
1996 K1100LT 0233004 Lohengrin Mystic Red 38,000 miles currently 48,061 miles.
1983 K100RS 0004449 Odette R100 colours 58,000 miles. Sprint fairing now 61,190 miles

Past:
1968 Yamaha 80 YG1
1971 Yamaha 125 YAS-1
1968 Honda 125 SS
1970 Honda CD 175
1973 Honda CB500-4
Honda CX 500
    

Ringfad

Ringfad
Life time member
Life time member
I had these bolts, for the engine protection bars, on my K100 16V and was able to use a standard socket to remove them, I don't recall the size but was nothing unusual.


__________________________________________________
Removing engine from the frame..which size socket? Ir-log10

   ;BMW; K100RS Style Black 1987 105K Km     ;BMW; K1 Black 1993 60K Km     ;BMW;  K1100RS Black 1996       ;BMW; K1 Blue 1990 25K Miles
    

Kyle10

Kyle10
Life time member
Life time member
8mm hexhead driver
Removing engine from the frame..which size socket? 8mmhexheaddriver_zps1383c3af

    

Rick G

Rick G
admin
admin
The bolts that attach the engine protection bars definitely are not 8mm socket head cap screws.
They are a fit to a conventional 12 point socket and 22mm from memory.
The bolts that are for the front mounts that are 8mm socket head cap screws are for the engines without the protection bars.



Last edited by RicK G on Wed Feb 26, 2014 12:29 am; edited 1 time in total


__________________________________________________
"Man sacrifices his health in order to make money.
Then he sacrifices money to recuperate his health.
And then he is so anxious about the future that he does not enjoy the present; the result being that he does not live in the present or the future; he lives as if he is never going to die, and then dies having never really lived."   Dalai Lama


Bikes 1999 K1100 LT with a Big Block 1200
    

Inge K.

Inge K.
VIP
VIP
Removing engine from the frame..which size socket? Skrue_10


__________________________________________________
Inge K.
K100RS -86. (first owner), K1100LTSE -94.
    

gabriel

avatar
Platinum member
Platinum member
Hi everyone.

Thanks for your replies, especially Rick and Inge.
Inge, the photo you posted is the same type of screw I was referring to.
I want to replace the screw but don't know which type and size socket I should use.
Inge, any suggestions?
I will follow up your info Rick.
Thanks.

    

kioolt

kioolt
Silver member
Silver member
I don't know the size but I believe a 12 point socket will fit it.


__________________________________________________
2004 R1150RT 186,800 miles 
1991 K100LT 128,700 miles
1982 R100RT 106,900 miles
Total 422,400 BMW miles

AMA,BMWRA,BMWMOA


The cheapest thing on a BMW is the nut that connects the handlebars to the seat.
    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

K100-forum.com » K bike Pictures » Removing engine from the frame..which size socket?

Permissions in this forum:
You cannot reply to topics in this forum