BMW K bikes (Bricks)


You are not connected. Please login or register

K100-forum.com » Technical, repair and troubleshooting » Engine and transmission » Engine dimensions

View previous topic View next topic Go down  Message [Page 1 of 1]

1Back to top Go down   Engine dimensions Empty Engine dimensions Wed Mar 27, 2013 7:02 pm

blimp

blimp
active member
active member

Hi, can anyone tell me the measurements of a k100 or k1100 engine.

From the sump to top of cylinder head


From timing case cover to the join with gearbox.

Also, the diameter of the clutch disc, not the friction plate, but the outside diameter of the cover plate.


Many thanks in advance.

    

2Back to top Go down   Engine dimensions Empty Re: Engine dimensions Wed Mar 27, 2013 10:41 pm

Rick G

Rick G
admin
admin
Length 502mm Width 498mm Height 410mm and clutch is 210mm
Hope that helps


__________________________________________________
"Man sacrifices his health in order to make money.
Then he sacrifices money to recuperate his health.
And then he is so anxious about the future that he does not enjoy the present; the result being that he does not live in the present or the future; he lives as if he is never going to die, and then dies having never really lived."   Dalai Lama


Bikes 1999 K1100 LT with a Big Block 1200
    

3Back to top Go down   Engine dimensions Empty Re: Engine dimensions Thu Mar 28, 2013 10:49 am

blimp

blimp
active member
active member
Many thanks.

    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

K100-forum.com » Technical, repair and troubleshooting » Engine and transmission » Engine dimensions

Permissions in this forum:
You cannot reply to topics in this forum