BMW K bikes (Bricks)

You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down    removing computer on Sun Sep 08, 2013 5:58 pm

ARTCOLLINSJR

avatar
Silver member
Silver member
I have been searching for the thread I saw at some point describing the computer removal procedure. Can someone with a memory direct me to the thread?
Thx

    

2Back to top Go down    Re: removing computer on Sun Sep 08, 2013 6:30 pm

Inge K.

avatar
VIP
VIP
Have a look at reply 4 (and 8)in thisthread, it's about removing the battery.....but first you have remove the FI computer.



Last edited by Inge K. on Sun Sep 08, 2013 6:43 pm; edited 1 time in total


__________________________________________________
Inge K.
K100RS -86. (first owner), K1100LTSE -94.
    

3Back to top Go down    computer on Sun Sep 08, 2013 6:37 pm

ARTCOLLINSJR

avatar
Silver member
Silver member
Yes. I have an Ungo box screwed into the plastic tray above it which I am removing.I am Deoxit-ing all the connections. When i got the bike, no remote came with the sale for the alarm/immobilize system, so I am deleting the alarm. I need to slide out the computer to get at the far side of the fasteners.

    

4Back to top Go down    Re: removing computer on Sun Sep 08, 2013 6:48 pm

Inge K.

avatar
VIP
VIP
New info added in my previous reply.......


__________________________________________________
Inge K.
K100RS -86. (first owner), K1100LTSE -94.
    

5Back to top Go down    computer on Thu Sep 19, 2013 12:13 pm

ARTCOLLINSJR

avatar
Silver member
Silver member
Computer out, Ungo alarm system removed, comptuer in, wires taped.
Bike runs.
Thanks
Funny thing. I have had the bike since 12-2-2012, put on 5000 miles
I found the cover to the fuse box sitting on the engine block during the ungo alarm removal.
A little oily, but a clean and on it went!

    

6Back to top Go down    Re: removing computer on Sat Apr 08, 2017 3:28 am

kdicke

avatar
New member
New member
How'd you remove the ungo alarm. I'm having trouble

    

7Back to top Go down    Re: removing computer on Sat Apr 08, 2017 11:22 am

Laitch

avatar
Life time member
Life time member
kdicke wrote:How'd you remove the ungo alarm. I'm having trouble
Because this is a four year old thread, you might get a more rapid response from send a personal message (pm) to ARTCOLLINSJR.

In the meantime, this MOTOBRICK.COM thread might be of some help. There's a wiring diagram in it.


__________________________________________________
1995 K75T 60,000 miles
    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum