BMW K bikes (Bricks)

You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   Bep 3.0 + cauge Empty Bep 3.0 + cauge Mon Jan 27, 2020 2:18 am

freed

freed
active member
active member
Hi,

I am building my cafe racer and the original speedo has to go.
I will buy BEP 3.0, and my question is what is the cheapest and easiest speedo to fit and works also? My bike 1985. 
I am not so electrical person so plugin bep and clear / simple instructions to gauge is needed.

    

2Back to top Go down   Bep 3.0 + cauge Empty Re: Bep 3.0 + cauge Mon Jan 27, 2020 9:23 am

Laitch

Laitch
Life time member
Life time member
@freed wrote:I am not so electrical person . . .
Don't worry about that; you'll be an electrical person by the time you finish wiring that thing. Smile Have you purchased and learned how to use a multimeter yet? That is a motorcycle builder's friend.

The Acewell 2853 is not the cheapest but there is possibly more written here about its installation with the BEP than most of the other speedos. The cheapest speedos may not have low oil pressure warning lights. You should avoid them, so read carefully about what is being offered with your intended purchase.


__________________________________________________
1995 K75 81,000 miles
Bep 3.0 + cauge Usa-lo10
    

3Back to top Go down   Bep 3.0 + cauge Empty Re: Bep 3.0 + cauge Wed Jan 29, 2020 1:10 am

freed

freed
active member
active member
@Laitch wrote:
@freed wrote:I am not so electrical person . . .
Don't worry about that; you'll be an electrical person by the time you finish wiring that thing. Smile Have you purchased and learned how to use a multimeter yet? That is a motorcycle builder's friend.

The Acewell 2853 is not the cheapest but there is possibly more written here about its installation with the BEP than most of the other speedos. The cheapest speedos may not have low oil pressure warning lights. You should avoid them, so read carefully about what is being offered with your intended purchase.

I found out that if I order this Acewell 2853 ja Bep from acewell.de, they will do the wiring ready to plug it on. Mayby I will use this.

    

4Back to top Go down   Bep 3.0 + cauge Empty Re: Bep 3.0 + cauge Wed Jan 29, 2020 3:04 am

Laitch

Laitch
Life time member
Life time member
@freed wrote:I found out that if I order this Acewell 2853 ja Bep from acewell.de, they will do the wiring ready to plug it on. Mayby I will use this.
Perhaps you should review some of the experiences of others found at this link .


__________________________________________________
1995 K75 81,000 miles
Bep 3.0 + cauge Usa-lo10
    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum