BMW K bikes (Bricks)

You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   Motogadget Button Question Empty Motogadget Button Question on Tue Oct 13, 2020 1:18 pm

dwnhillskater

dwnhillskater
active member
active member
I am looking at the Motogadget buttons for the handlebar controls for my upcoming K1100 project. I was curious for those who have used these, what configuration did you pick for the left and right side? 2,3,4 button?

Thanks!

    

2Back to top Go down   Motogadget Button Question Empty Re: Motogadget Button Question on Tue Nov 24, 2020 8:12 pm

roach374

roach374
active member
active member
When I used this on an old Honda CB500, I had two buttons on the left (Left Turn and horn), and three on the right (starter, hi-beams and Right Turn).

Kill switch was removed, and I had set up the m-Unit so the bike's low-beam was always-on.

I think the K-Bikes have some extra controls (heated handlebars, etc) that might not be compatible with the m.Button, so make room for those as well if you want to keep them.

    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum