BMW K bikes (Bricks)

You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   Paralever Torque Specs Empty Paralever Torque Specs on Tue Aug 12, 2014 7:33 pm

KafeRacer

KafeRacer
Silver member
Silver member
I am sure it is on the site somewhere, but cant find it.  I am looking for the torque specs for a 4v K100, Paralever rear end. I am installing the paralever on a 2v bike and only have a 2v manual so it does not include these torque specs.

Looking for torque specs for:

Paralever Fixed Pivot Pin
Paralever Preload Pivot Pin
Paralever Preload Pin Locking Nut
Front Torque Arm Bolt
Rear Torque Arm Bolt

Also is there any different torque specs for the 5th Center bolt on the wheel?  I assume the rest are the same as any other 4 bolt K100 "Y" spoke wheel.

Thanks.


__________________________________________________
Dave Evans
'Kafe Racer'
kaferacer.wordpress.com

1990 K75RT
1985 K100 Kafe Racer
http://kaferacer.wordpress.com
    

2Back to top Go down   Paralever Torque Specs Empty Re: Paralever Torque Specs on Tue Aug 12, 2014 7:41 pm

duck

duck
Life time member
Life time member
@KafeRacer wrote:I am sure it is on the site somewhere, but cant find it.  I am looking for the torques specs for a 4v K100, Paralever rear end. I am installing the paralever on a 2v bike and only have a 2v manual so it does not include these torque specs.

Looking for torque specs for:

Paralever Fixed Pivot Pin
Paralever Preload Pivot Pin
Paralever Preload Pin Locking Nut
Front Torque Arm Bolt
Rear Torque Arm Bolt

Also is there any different torque specs for the 5th Center bolt on the wheel?  I assume the rest are the same as any other 4 bolt K100 "Y" spoke wheel.

Thanks.

1) 150 Nm (which really doesn't matter that much as the other pivot pin determines how much pressure there is on the bearings)
2) 7.3 Nm
3) 105 Nm (which again doesn't matter that much as it's a locknut so it just needs to be tight enough to serve that purpose)
4 & 5) 43 Nm

All 5 lug bolts - 105Nm.


__________________________________________________
Current stable:
86 Custom K100 (standard fairing, K75 Belly pan, Ceramic chromed engine covers, paralever)
K75 Frankenbrick (Paralever, K11 front end, hybrid ABS, K1100RS fairing, radial tires)
86 K75C Turbo w/ paralever
94 K1100RS
93 K1100LT (x2)
91 K1
93 K75S (K11 front end)
91 K75S (K1 front end)
14 Yamaha WR250R
98 Taxi Cab K1200RS
14 K1600GT
http://www.ClassicKBikes.com
    

3Back to top Go down   Paralever Torque Specs Empty Re: Paralever Torque Specs on Tue Aug 12, 2014 7:43 pm

KafeRacer

KafeRacer
Silver member
Silver member
Thanks Duck,  I knew you would have this info with your Paralever conversion experience.

Cheers.


__________________________________________________
Dave Evans
'Kafe Racer'
kaferacer.wordpress.com

1990 K75RT
1985 K100 Kafe Racer
http://kaferacer.wordpress.com
    

4Back to top Go down   Paralever Torque Specs Empty Re: Paralever Torque Specs on Tue Aug 12, 2014 7:45 pm

duck

duck
Life time member
Life time member
I built 2V and 4V 1 page "cheat sheets" several years ago:

http://classickbikes.com/ckb.tech/0.ckb.tech.files/torque/4V_K__Torque_Specs.pdf


__________________________________________________
Current stable:
86 Custom K100 (standard fairing, K75 Belly pan, Ceramic chromed engine covers, paralever)
K75 Frankenbrick (Paralever, K11 front end, hybrid ABS, K1100RS fairing, radial tires)
86 K75C Turbo w/ paralever
94 K1100RS
93 K1100LT (x2)
91 K1
93 K75S (K11 front end)
91 K75S (K1 front end)
14 Yamaha WR250R
98 Taxi Cab K1200RS
14 K1600GT
http://www.ClassicKBikes.com
    

5Back to top Go down   Paralever Torque Specs Empty Re: Paralever Torque Specs on Tue Aug 12, 2014 7:48 pm

KafeRacer

KafeRacer
Silver member
Silver member
Brilliant,  That will be added to the first page of my manual.

Cheers.


__________________________________________________
Dave Evans
'Kafe Racer'
kaferacer.wordpress.com

1990 K75RT
1985 K100 Kafe Racer
http://kaferacer.wordpress.com
    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum