BMW K bikes (Bricks)


You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   Clock jumps Empty Clock jumps Tue Jul 24, 2018 3:27 pm

nobbylon

nobbylon
Silver member
Silver member
Set my clock a few times now but it jumps to a random time! any ideas folks? thx

    

2Back to top Go down   Clock jumps Empty Re: Clock jumps Tue Jul 24, 2018 5:59 pm

MartinW

MartinW
Life time member
Life time member
Either you are going so fast that you are warping time. Or a bad connection or dry solder joint. Clock jumps 610153
Regards Martin.

    

3Back to top Go down   Clock jumps Empty Re: Clock jumps Tue Jul 24, 2018 6:21 pm

sidecar paul

sidecar paul
Life time member
Life time member
nobbylon,

 You could try this idea that I used to increase the pressure on the contact strips of the liquid crystal display.....it might work!

https://www.k100-forum.com/t4319-clock-repair

Paul.

    

4Back to top Go down   Clock jumps Empty Re: Clock jumps Tue Jul 24, 2018 6:43 pm

robmack

robmack
Life time member
Life time member
Poor connection with Pin 1 on the OEM connector. Might also be a poor connection with the flexible circuit card strip inside the gauge cluster but tackle the Pin 1 problem first.

http://k75retro.blogspot.ca/
    

5Back to top Go down   Clock jumps Empty Re: Clock jumps Tue Jul 24, 2018 6:46 pm

nobbylon

nobbylon
Silver member
Silver member
thanks for the suggestions. Another job to do!

    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum