BMW K bikes (Bricks)

You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   Reynolds Rack question  Empty Reynolds Rack question on Fri Nov 09, 2018 2:25 pm

duck

duck
Life time member
Life time member
I have a Reynolds Rack 240 on the shelf that I want to use on a K75S. The reason that it's on the shelf is that the last time I tried it it left very little room between the Reynolds Rack and the Z racks so that it was near impossible to get system cases on and off. I think it might be bent a little but it seems straight. Has anybody else had this issue with a Reynolds rack?

I'm considering adding some spacers to push the Z rack out about half an inch so the system cases will go on and off easier.

(I only have this issue with the 2V 240 model. The 4V 241 model on my K1100RS works just fine.)


__________________________________________________
Current stable:
86 Custom K100 (standard fairing, K75 Belly pan, Ceramic chromed engine covers, paralever)
K75 Frankenbrick (Paralever, K11 front end, hybrid ABS, K1100RS fairing, radial tires)
86 K75C Turbo w/ paralever
94 K1100RS
93 K1100LT (x2)
91 K1
93 K75S (K11 front end)
91 K75S (K1 front end)
14 Yamaha WR250R
98 Taxi Cab K1200RS
14 K1600GT
http://www.ClassicKBikes.com
    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum