BMW K bikes (Bricks)

You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   86 K100 unknown part Empty 86 K100 unknown part on Sat Apr 18, 2020 4:32 am

yankeeone

avatar
Platinum member
Platinum member
Hi, I am replacing the head bearings on my 86 K100, it had a RT fairing on it , I have removed that and pulled away the speedometer ect.
At some point this part fell off and I found it on the floor. Any ideas?
The hole is threaded


86 K100 unknown part Img_4040-jpg 86 K100 unknown part Img_4041-jpg


 


    

2Back to top Go down   86 K100 unknown part Empty Re: 86 K100 unknown part on Sat Apr 18, 2020 10:29 am

Arlina

Arlina
Life time member
Life time member
Never seen that one....


__________________________________________________
86 K100 unknown part Eu-log10  K1100RS/LT - R1200RT - R1100RS (RIP) - Cagiva SST 350 Ala Verde - K75LT project
    

3Back to top Go down   86 K100 unknown part Empty Re: 86 K100 unknown part on Sat Apr 18, 2020 10:51 am

tinyspuds

tinyspuds
Life time member
Life time member
I assume it’s metal?
What is the span across the flats?


__________________________________________________
1985 BMW K100RT + Hedingham HUB and LL’s. VIN 0028106. (Not blind to the irony of an April 1 production date).
1954 Royal Enfield 350 Bullet. Original.
    

4Back to top Go down   86 K100 unknown part Empty Part on Sat Apr 18, 2020 10:53 am

daveyson

daveyson
Life time member
Life time member
I'll guess non original replacement. What's the internal diameter? Maybe it matches the vacuum caps, if ones missing. Or replacing the rubber supports for the tool box, or fuse box, especially if one's missing and this substitutes it.


__________________________________________________
11/1985 bmw k100rt (late model)  Vin. 0090567
    

5Back to top Go down   86 K100 unknown part Empty Re: 86 K100 unknown part on Sat Apr 18, 2020 11:20 am

duck

duck
Life time member
Life time member
Muffler bearing cap. Twisted Evil

Metal, rubber or plastic?

What size are the threads?

Can you take a picture with a ruler in it?


__________________________________________________
Current stable:
86 Custom K100 (standard fairing, K75 Belly pan, Ceramic chromed engine covers, paralever)
K75 Frankenbrick (Paralever, K11 front end, hybrid ABS, K1100RS fairing, radial tires)
86 K75C Turbo w/ paralever
94 K1100RS
93 K1100LT (x2)
91 K1
93 K75S (K11 front end)
91 K75S (K1 front end)
14 Yamaha WR250R
98 Taxi Cab K1200RS
14 K1600GT
http://www.ClassicKBikes.com
    

6Back to top Go down   86 K100 unknown part Empty Re: 86 K100 unknown part on Sat Apr 18, 2020 1:40 pm

yankeeone

avatar
Platinum member
Platinum member
Thanks for the reply's, the part is about 7/8 inch long with the flats about 1/2 inch and the threads the same as the transmission to bell housing bolts m8x45. I did take a look at parts fiche with no luck . The material seems to be a nylon type deal.
I have never seen it in my shop before, possible some one is messing with me. On the plus side I figured out how to post photos from my phone.

    

7Back to top Go down   86 K100 unknown part Empty Re: 86 K100 unknown part on Thu Apr 30, 2020 11:48 am

Bill Black

Bill Black
active member
active member
Some kind of steering stop ? Maybe ? 
regards
Bill


__________________________________________________
1989 K100 RS Blue/White
1995 16V K100 based Grinnall Scorpion
1980 XS1100 with Watsonian Palma sidecar
1971 Sanglas 400
1980 Bultaco 199A Sherpa T 350
2010 KTM 450 EXC
1965 Bridgestone Dual Twin 175
1973 Yamaha DT360
and a whole bunch more WIP projects  Smile
    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum