BMW K bikes (Bricks)

You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   LT legshields and fallover bars Empty LT legshields and fallover bars on Sun May 24, 2020 6:01 pm

Dai

Dai
Life time member
Life time member
Is anyone here riding an RT / LT fitted with fallover bars? If so, would you be kind enough to measure the centre point of the crashbar hole using the lower edge and front edge as reference points?

Thank you.


__________________________________________________
1983 K100 upgraded to K100RS spec, 1987 K100RT
Others...
1978 Moto Guzzi 850-T3, 1979 Moto Guzzi 850-T3 California,1993 Moto Guzzi 1100ie California
2020 Royal Enfield Bullet 500
    

2Back to top Go down   LT legshields and fallover bars Empty Re: LT legshields and fallover bars on Thu May 28, 2020 6:56 am

88

88
Life time member
Life time member
I have a set of K100 here Dai but one has a rewelded foot on it . I have a good k1100 set (I think the ruber mounted plates differ for the bars bit the ) Did you want measurements for the mounting plates?


__________________________________________________
LT legshields and fallover bars Ir-log11 88....May contain nuts!LT legshields and fallover bars Ir-log11

"The world is a book and those who do not travel read only one page." - St. Augustine from 1600 years ago & still true!

Bike: K100LT 1988. 0172363. AKA the Bullion Brick! Mods: k1100 screen and stands.
K1: 1990. 6374189. Custom Stealth Black paint.
    

3Back to top Go down   LT legshields and fallover bars Empty Re: LT legshields and fallover bars on Thu May 28, 2020 10:26 am

Dai

Dai
Life time member
Life time member
Hi Will

I've got the bars, it's just that the RT legshields I have don't have the hole in them where the fallover bars bolt to the top of the engine. I was looking for the offsets for the centre of that hole from the front edge and from the lower edge, so I could threaten the RT legshields with a Black&Decker DeWalt.

Now I come to re-read the OP, I can see where it could be misleading.


__________________________________________________
1983 K100 upgraded to K100RS spec, 1987 K100RT
Others...
1978 Moto Guzzi 850-T3, 1979 Moto Guzzi 850-T3 California,1993 Moto Guzzi 1100ie California
2020 Royal Enfield Bullet 500
    

4Back to top Go down   LT legshields and fallover bars Empty Re: LT legshields and fallover bars on Thu May 28, 2020 12:58 pm

92KK 84WW Olaf

avatar
Life time member
Life time member
Dai

The 'leg shields' as in bottom part of RT fairing....one of mine happens to have the drill out location for the engine bars moulded in on the inside face.


__________________________________________________
1992 K100LT 0193214 Bertha Blue 101,000 miles
1984 K100RT 0022575 Brutus Baja Red 578 bought 36,000 now 89,150 miles
1997 K1100LT 0188024 Wotan Mystic Red 689 58,645 now 106,950 miles Deceased.
1983 K100RS 0011171 Fricka 606 Alaska Blue 29,495 miles Damn K Pox Its a Bat outta Hell Now 37,190 miles
1996 K1100LT 0233004 Lohengrin Mystic Red 38,000 miles.
    

5Back to top Go down   LT legshields and fallover bars Empty Re: LT legshields and fallover bars on Thu May 28, 2020 1:37 pm

Dai

Dai
Life time member
Life time member
So they do, Olaf, so they do....

Ta! Very Happy


__________________________________________________
1983 K100 upgraded to K100RS spec, 1987 K100RT
Others...
1978 Moto Guzzi 850-T3, 1979 Moto Guzzi 850-T3 California,1993 Moto Guzzi 1100ie California
2020 Royal Enfield Bullet 500
    

6Back to top Go down   LT legshields and fallover bars Empty Re: LT legshields and fallover bars on Thu May 28, 2020 5:31 pm

92KK 84WW Olaf

avatar
Life time member
Life time member
@Dai wrote:So they do, Olaf, so they do....

Ta! Very Happy
That'll cost you 2c...but since they introduced rounding to the nearest 5c....glad to be of service. But you have to drill the lead hole from the inside then use a fine hole cutter for laminates from the outside using the lead hole. I am sure you have an alternative means but just flagging it for anyone else making those holes. Of course one could put a grommet in for a 'finished' look.


__________________________________________________
1992 K100LT 0193214 Bertha Blue 101,000 miles
1984 K100RT 0022575 Brutus Baja Red 578 bought 36,000 now 89,150 miles
1997 K1100LT 0188024 Wotan Mystic Red 689 58,645 now 106,950 miles Deceased.
1983 K100RS 0011171 Fricka 606 Alaska Blue 29,495 miles Damn K Pox Its a Bat outta Hell Now 37,190 miles
1996 K1100LT 0233004 Lohengrin Mystic Red 38,000 miles.
    

7Back to top Go down   LT legshields and fallover bars Empty Re: LT legshields and fallover bars on Thu May 28, 2020 6:22 pm

Arlina

Arlina
Moderator
Moderator
Something like this will do a nice job;

LT legshields and fallover bars 9480152907806


__________________________________________________
LT legshields and fallover bars Eu-log10  K1100RS/LT - R1200RT - R1100RS (RIP) - Cagiva SST 350 Ala Verde - K75LT project
    

8Back to top Go down   LT legshields and fallover bars Empty Re: LT legshields and fallover bars on Thu May 28, 2020 6:25 pm

Dai

Dai
Life time member
Life time member
I hate those step borers - prefer to buy the individual drill bits.



Okay. I admit I did think about it but I'm not paying that price for one job. 5mm chain-drilling followed by a 30mm 2nd-cut half-round file here I come...


__________________________________________________
1983 K100 upgraded to K100RS spec, 1987 K100RT
Others...
1978 Moto Guzzi 850-T3, 1979 Moto Guzzi 850-T3 California,1993 Moto Guzzi 1100ie California
2020 Royal Enfield Bullet 500
    

9Back to top Go down   LT legshields and fallover bars Empty Re: LT legshields and fallover bars on Thu May 28, 2020 7:02 pm

Arlina

Arlina
Moderator
Moderator
As wrench monkey I use that drill a lot Smile


__________________________________________________
LT legshields and fallover bars Eu-log10  K1100RS/LT - R1200RT - R1100RS (RIP) - Cagiva SST 350 Ala Verde - K75LT project
    

10Back to top Go down   LT legshields and fallover bars Empty Re: LT legshields and fallover bars on Fri May 29, 2020 6:56 am

92KK 84WW Olaf

avatar
Life time member
Life time member


__________________________________________________
1992 K100LT 0193214 Bertha Blue 101,000 miles
1984 K100RT 0022575 Brutus Baja Red 578 bought 36,000 now 89,150 miles
1997 K1100LT 0188024 Wotan Mystic Red 689 58,645 now 106,950 miles Deceased.
1983 K100RS 0011171 Fricka 606 Alaska Blue 29,495 miles Damn K Pox Its a Bat outta Hell Now 37,190 miles
1996 K1100LT 0233004 Lohengrin Mystic Red 38,000 miles.
    

11Back to top Go down   LT legshields and fallover bars Empty Re: LT legshields and fallover bars on Fri May 29, 2020 7:31 am

Arlina

Arlina
Moderator
Moderator
Those holesaws I have too, lot of different sizes.
They ain't cheap, but do a good job.


__________________________________________________
LT legshields and fallover bars Eu-log10  K1100RS/LT - R1200RT - R1100RS (RIP) - Cagiva SST 350 Ala Verde - K75LT project
    

12Back to top Go down   LT legshields and fallover bars Empty Re: LT legshields and fallover bars on Fri May 29, 2020 8:17 am

88

88
Life time member
Life time member
@Dai wrote:Hi Will

I've got the bars, it's just that the RT legshields I have don't have the hole in them where the fallover bars bolt to the top of the engine. I was looking for the offsets for the centre of that hole from the front edge and from the lower edge, so I could threaten the RT legshields with a Black&Decker DeWalt.

Now I come to re-read the OP, I can see where it could be misleading.
 No worries Dai . I was just having a quick look - could've been my speed reading that led me astray!


__________________________________________________
LT legshields and fallover bars Ir-log11 88....May contain nuts!LT legshields and fallover bars Ir-log11

"The world is a book and those who do not travel read only one page." - St. Augustine from 1600 years ago & still true!

Bike: K100LT 1988. 0172363. AKA the Bullion Brick! Mods: k1100 screen and stands.
K1: 1990. 6374189. Custom Stealth Black paint.
    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum