BMW K bikes (Bricks)

You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   ABS K75 final drive Empty ABS K75 final drive Fri Jun 25, 2021 7:36 pm

arbalest

avatar
Silver member
Silver member
I want to use an ABS K75 final drive (37/11) (available on Fleabay) in a non abs application. 76 airhead R90/6 with modified K100 s.a., K1100 18" three spoke rear wheel sidecar rig. Will the ABS ring cause any problems or can I just remove it?

    

2Back to top Go down   ABS K75 final drive Empty Re: ABS K75 final drive Fri Jun 25, 2021 7:44 pm

TacKler

TacKler
Life time member
Life time member
I presume you are talking about the ABS ring on the rear wheel?  If so just remove it.  From memory there are three screws.


__________________________________________________
Red 1991 K75S
    

3Back to top Go down   ABS K75 final drive Empty ABS ring Sat Jun 26, 2021 9:01 am

arbalest

avatar
Silver member
Silver member
Thanks.

    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum