BMW K bikes (Bricks)


You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


pendullumx

pendullumx
active member
active member
I recently purchased a 1985 k100 RS. The bike has been setting since 2008 in a garage. I recently pulled out the injectors and fuel rail and cleaned it out. I tested out the injectors to make sure they are working. They work, but I was wondering if they need to be spray in mist or a stream. Because they are spraying in a stream. Just wanted to make sure before they are correct before I reinstall them

    

Point-Seven-five

Point-Seven-five
Life time member
Life time member
They spray a stream of fuel onto the intake valve where it gets atomized before going into the cylinder.


__________________________________________________
Present: 1991 K100RS "Moby Brick Too"
 
Past:
1994 K75RT "Ilsa, She Wolf of the SS"
1988 K100RS SE "Special Ed"
1994 K75S "Cheetos"
1992 K100RS "Moby Brick" R.I.P.
1982 Honda FT500
1979 Honda XR185
1977 Honda XL125
1974 Honda XL125
1972 OSSA Pioneer 250
1968 Kawasaki 175
    

Porto

Porto
Silver member
Silver member
Yes I agree. A single hole jet in the originals spraying a 30 degree stream. I had a lot of injector trouble for a while and ended up replacing mine.

https://gpleather.com
    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum