BMW K bikes (Bricks)

You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


mook

mook
Silver member
Silver member
Further to my recent issues with loss of power thought to be due to the RHS switchgear,

It happened again this morning, so armed with screwdrivvers I opened it up (fully this time) removin the switches for signal, cancel and headlights.

when the headlight switch came out a small ball bearing also popped out. I pu this back in where I thought appropriate, butI seem to have jammed the light switch.

does anyone know where this ball bearing goes? a photo would be perfect. I suppose trial and error might do it, but I run an increasing risk of dropping the ball bearing on the ground if I continue.

thanks!

(the bike starts fine now by the way, just dirt/moisture ion the terminals it would seem.)

    

mook

mook
Silver member
Silver member
Ah, I've just noticed someone had a similar prob here
I'll keep an eye on that thread.
Feel free to delete this thread if necessary.

    

blaKey

avatar
Life time member
Life time member
The download section has switchgear teardowns for you to look at.


__________________________________________________
Neil
K100RS 1986 RED!

Dress for the ride and the potential slide.
    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum