BMW K bikes (Bricks)

You are not connected. Please login or register

K100-forum.com » Technical, repair and troubleshooting » Engine and transmission » Fuel Injector reconditioning recommendations in Canada

View previous topic View next topic Go down  Message [Page 1 of 1]

klamityboy

klamityboy
Gold member
Gold member
Does anyone have any suggestions for places in Canada for Fuel Injector reconditioning? I have seen several recommendations for places in the US but anytime anything has to cross the border it adds several layers of complexity. Thanks in advance.

    

club_c

club_c
Life time member
Life time member
klamityboy wrote:Does anyone have any suggestions for places in Canada for Fuel Injector reconditioning. I have seen several recommendations for places in the US but anytime anything has to cross the border it adds several layers of complexity. Thanks in advance
k-boy, I tried that route, and it's about $100 for servicing - and servicing was a fail - could not unseal them.  Or you can get a refurb'd set off ebay for the same money, or a used set for about $40...


__________________________________________________
"There's never enough time to do it right, but there's always time to do it over."

1988 K100RS SE VIN 01477554
    

robmack

robmack
Life time member
Life time member
Same problems on the Eastern coast.  There aren't many places that refurbish the injectors for the same low price, high service quality as in the States.  It might be better getting a set of the newer Bosch Type II injectors with the improved spray pattern.  
Read this thread.


__________________________________________________
Robert
1987 K75 @k75retro.blogspot.ca
http://k75retro.blogspot.ca/
    

klamityboy

klamityboy
Gold member
Gold member
I see Euro Motoelectrics has a set of 4 refurbed for $199.  

http://www.euromotoelectrics.com/product-p/boinj-450rx4.htm 

I only need three and that doesn't seem to be an option. Any other good outlets for refurbed injectors?

Cheers

    

rosskko

rosskko
VIP
VIP
Send a message to RJTRUCKER.

He is in the states, but will recon your injectors.

LINK to his post.


__________________________________________________
1986 K100RT VIN 0093801K100RT with summer fairing for a northern visitor

Basic/2 6308802K100CJ  05/1988

K1100RS 0194321
    

welshlamb

welshlamb
active member
active member
Hi,  apologies if this is hijacking but I just posted a plea for Bosch p/n info on a thread in "buy and sell" section.
Lots of threads on the 4 hole type 2 Bosch injectors but I'm struggling to find the Bosch p/ns for the correct ones for an early K100 so I can track down on ebay etc.  Help please
A Newbie with a rough running K100!


__________________________________________________
1984 K100RS; 1987 Laverda SFC-RGS; 2010 KTM 990 Adventure; 1961 NSU Quickly (honestly!)
dream bikes: most 70/80 stuff (CBX, Z1300, Z1,  Bimota SB4, Ducati 900, Guzzi etc)
next bikes (if allowed!)  Gilera Nordwest, and a twin (Guzzi/Ducati?) so I have a 1, 2, 3, 4 cylinder garage:cheers:
    

View previous topic View next topic Back to top  Message [Page 1 of 1]

K100-forum.com » Technical, repair and troubleshooting » Engine and transmission » Fuel Injector reconditioning recommendations in Canada

Permissions in this forum:
You cannot reply to topics in this forum