Will, my "StihlnotworKing" was not available , so I opted for the "he'sKnutsKutter" to get the job done.
The low torque of the K had no issues with getting the load back to the tent site.

Well it sure looks like a fun time away mate, Uber Kart, Hmmmm what do I need to go to the dump?

Time for a Kart upgrade . 

I have recently added this little set up to the riding experience . 
Since our last posting in 2016, Ol' Blue has been retired , and Smurfette has taken on the task of providing a legacy on behalf of our komrade RossKKo. 
As i am requiring the need to konvey various equipment to set up a Charity awareness stall , I have upgraded to this little outfit . 

The base frame on leaf springs , with 8"inch high speed alloy wheels . 
Total width to the outside edge of axle = 1000mm


I found a "Karrite" car luggage pod at my local recycle centre for $30aud  , 
the only repairs needed to it , a broken key in the lid lock , costing $15 ti fix , this included 2 new keys . 
Size of pod is 1300mm long x 850mm wide x 350mm high.

I have mounted some galvanised C section   50mm x 160mm to the trailer chassis , before mounting the kapsule . 
This provides room under the pod to store 3 plastic mould tables . 


For the moment it is fitted with an Al-ko pressed steel coupling . 
Eventually I would like to swap it over for a swivel hitch . 


I can now easily transport all the neccessary gear to help with setting up . 
Plenty of room inside the kapsule to carry the 3m x3m gazebo.