BMW K bikes (Bricks)


You are not connected. Please login or register

K100-forum.com » Technical, repair and troubleshooting » Frame, fairing and wheels » Engine crash bars

View previous topic View next topic Go down  Message [Page 1 of 1]

1Back to top Go down   Engine crash bars Empty Engine crash bars Fri Sep 26, 2014 9:25 pm

gabriel

avatar
Platinum member
Platinum member
Hi everyone

I used to have crash bars on my k100 1984 Model.
I am trying to remove the front engine frame bolts..
They are the fillister head screws..does anyone know the socket size for these screws. I tried 20....no good.
Cheers

    

2Back to top Go down   Engine crash bars Empty Re: Engine crash bars Fri Sep 26, 2014 9:39 pm

Rick G

Rick G
admin
admin
22mm or 7/8 will also do it.


__________________________________________________
"Man sacrifices his health in order to make money.
Then he sacrifices money to recuperate his health.
And then he is so anxious about the future that he does not enjoy the present; the result being that he does not live in the present or the future; he lives as if he is never going to die, and then dies having never really lived."   Dalai Lama


Bikes 1999 K1100 LT with a Big Block 1200
    

3Back to top Go down   Engine crash bars Empty Re: Engine crash bars Fri Sep 26, 2014 9:44 pm

gabriel

avatar
Platinum member
Platinum member
I'm going to bunnings for that elusive socket..
Thanks for your reply, rick

Cheers

    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

K100-forum.com » Technical, repair and troubleshooting » Frame, fairing and wheels » Engine crash bars

Permissions in this forum:
You cannot reply to topics in this forum