BMW K bikes (Bricks)


You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


yankeeone

avatar
Platinum member
Platinum member
Hi bike is 87 k100, I updated one coil, due to a failed original, the coil cover bolt holes no longer line up and the bolts to hold the cover are larger on the new coil. 
If I get another new coil (the black and red updated version) will the old cover work with new bolts?
Thanks

    

92KK 84WW Olaf

avatar
Life time member
Life time member
I ran into that problem and found you need ether 2 of the old coils or 2 of the later coils, could not get the cover on using 1 coil of each type.


__________________________________________________
1992 K100LT 0193214 Bertha Blue 101,000 miles
1984 K100RT 0022575 Brutus Baja Red 578 bought 36,000 now 89,150 miles
1997 K1100LT 0188024 Wotan Mystic Red 689 58,645 now 106,950 miles Deceased.
1983 K100RS 0011157 Fricka 606 Alaska Blue 29,495 miles Damn K Pox Its a Bat outta Hell Now 58,200 miles. 
1996 K1100LT 0233004 Lohengrin Mystic Red 38,000 miles currently 51,800 miles.
1983 K100RS 0004449 Odette R100 colours 58,000 miles. Sprint fairing now 63,390 miles

Past:
1968 Yamaha 80 YG1
1971 Yamaha 125 YAS-1
1968 Honda 125 SS
1970 Honda CD 175
1973 Honda CB500-4
Honda CX 500
    

Point-Seven-five

Point-Seven-five
Life time member
Life time member
You probably want to replace the other old coil since it's probably going to go bad sooner or later.


__________________________________________________
Present: 1991 K100RS "Moby Brick Too"
 
Past:
1994 K75RT "Ilsa, She Wolf of the SS"
1988 K100RS SE "Special Ed"
1994 K75S "Cheetos"
1992 K100RS "Moby Brick" R.I.P.
1982 Honda FT500
1979 Honda XR185
1977 Honda XL125
1974 Honda XL125
1972 OSSA Pioneer 250
1968 Kawasaki 175
    

tinyspuds

tinyspuds
Life time member
Life time member
Had the same issue with the red and black. The old cover wil definitely work but you need different bolts to screw into the mounting frame. NB. If you decide to carry your original working coil as a spare, keep the oem bolts on it.


__________________________________________________
1985 BMW K100RT + Hedingham HUB and LL’s. VIN 0028106.
1986 K100RS in boxes. VIN 0141918.
1954 Royal Enfield 350 Bullet. Original.
2000 Hayabusa with Charnwood chair, Wasp forks and EZS wheels.
    

yankeeone

avatar
Platinum member
Platinum member
Thanks everyone for there input. I will save up and get the other new coil, and the bigger bolts to hold the cover.

    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum