BMW K bikes (Bricks)


You are not connected. Please login or register

K100-forum.com » Technical, repair and troubleshooting » Frame, fairing and wheels » Swingarm measurement request

View previous topic View next topic Go down  Message [Page 1 of 1]

1Back to top Go down   Swingarm measurement request Empty Swingarm measurement request Mon Sep 24, 2012 9:10 pm

TommyRocker

TommyRocker
New member
New member
Hi all,

I just joined and I don't currently own a K100. I was hoping someone from this forum could give me some info I need. I haven't had any luck finding it on the google.

Does anyone know the following dimensions of the swingarm:

Width of the pivot point
length from pivot center to rear axle center

I appreciate any help offered.

    

2Back to top Go down   Swingarm measurement request Empty Re: Swingarm measurement request Mon Sep 24, 2012 10:01 pm

Rick G

Rick G
admin
admin
Width of the pivot point :- 310mm
Length from pivot center to rear axle center :- 405mm is as close as I can get without dismantling a bike.


__________________________________________________
"Man sacrifices his health in order to make money.
Then he sacrifices money to recuperate his health.
And then he is so anxious about the future that he does not enjoy the present; the result being that he does not live in the present or the future; he lives as if he is never going to die, and then dies having never really lived."   Dalai Lama


Bikes 1999 K1100 LT with a Big Block 1200
    

3Back to top Go down   Swingarm measurement request Empty Re: Swingarm measurement request Mon Sep 24, 2012 10:16 pm

TommyRocker

TommyRocker
New member
New member
Great, I appreciate you taking your time for this.

    

4Back to top Go down   Swingarm measurement request Empty Re: Swingarm measurement request Mon Sep 24, 2012 10:29 pm

Rick G

Rick G
admin
admin
No problems what are you planning


__________________________________________________
"Man sacrifices his health in order to make money.
Then he sacrifices money to recuperate his health.
And then he is so anxious about the future that he does not enjoy the present; the result being that he does not live in the present or the future; he lives as if he is never going to die, and then dies having never really lived."   Dalai Lama


Bikes 1999 K1100 LT with a Big Block 1200
    

5Back to top Go down   Swingarm measurement request Empty Re: Swingarm measurement request Tue Sep 25, 2012 2:51 am

TommyRocker

TommyRocker
New member
New member
I was looking to adapt it to my naked GoldWing project but it's about 25mm too wide. I might still pick one up off ebay to get a closer look at it, maybe it could be gotten around. One of these days I'll own a BMW bike. Until then, I'll just lurk and dream, haha

    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

K100-forum.com » Technical, repair and troubleshooting » Frame, fairing and wheels » Swingarm measurement request

Permissions in this forum:
You cannot reply to topics in this forum