BMW K bikes (Bricks)

You are not connected. Please login or register

K100-forum.com » Technical, repair and troubleshooting » Engine and transmission » Gearbox - the 2 shims in the cover

View previous topic View next topic Go down  Message [Page 1 of 1]

1Back to top Go down   Gearbox - the 2 shims in the cover Empty Gearbox - the 2 shims in the cover on Sun Feb 23, 2014 12:04 am

floyd

floyd
Life time member
Life time member
ummmmm,

What do you do if you didnt pay attention to which shim goes where in the cover of the gearbox?  Embarassed


__________________________________________________
K100 with lots of K1100 bits - mongrel of a thing...
    

2Back to top Go down   Gearbox - the 2 shims in the cover Empty Re: Gearbox - the 2 shims in the cover on Sun Feb 23, 2014 12:53 am

RicK G

RicK G
VIP
VIP
Yer gonna have to start from scratch and set up the clearances and backlash.
Make sure the pinion bearings don't have any axial play.


__________________________________________________
"Man sacrifices his health in order to make money.
Then he sacrifices money to recuperate his health.
And then he is so anxious about the future that he does not enjoy the present; the result being that he does not live in the present or the future; he lives as if he is never going to die, and then dies having never really lived."   Dalai Lama


Bikes 1993 K1100 LT, 1998 K1100 LT, 1993 K75 RT, 1996 K75RT, 1986 K75 GS, 1979 Z1300 Kawasaki X 2 for now
    

3Back to top Go down   Gearbox - the 2 shims in the cover Empty Re: Gearbox - the 2 shims in the cover on Sun Feb 23, 2014 1:00 am

floyd

floyd
Life time member
Life time member
@RicK G wrote:Yer gonna have to start from scratch and set up the clearances and backlash.
hmmmm damn, dont know what that means....

off to the mechanic it goes....


Is what your referring to on page 202 of the Clymers manual?


__________________________________________________
K100 with lots of K1100 bits - mongrel of a thing...
    

4Back to top Go down   Gearbox - the 2 shims in the cover Empty Re: Gearbox - the 2 shims in the cover on Sun Feb 23, 2014 3:12 am

charlie99

charlie99
VIP
VIP
seem to remember there was an amount of preload on the gearbox cover
but I have a Haynes manual or the bmw one ....available in the downloads Floyd

might be worth downloading it

??


__________________________________________________
cheezy grin whilst riding, kinda bloke ....oh the joy !!!! ...... ( brick aviator )

'86 K100 RT..#0090401 ..."Gerty" ( Gertrude Von Clickandshift ) --------O%OGearbox - the 2 shims in the cover Au-log10

'86 k100 rs.. #######..  "Fred " (f(rame) red ) ( Fredrick leichtundschnell ) - -
bits and pieces from many kind friends across the k100 world ...with many thanks ..
    

View previous topic View next topic Back to top  Message [Page 1 of 1]

K100-forum.com » Technical, repair and troubleshooting » Engine and transmission » Gearbox - the 2 shims in the cover

Permissions in this forum:
You cannot reply to topics in this forum