BMW K bikes (Bricks)

You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   Removing fork damper rods Empty Removing fork damper rods Mon May 02, 2011 2:34 am

pjjms

avatar
Silver member
Silver member
Any tricks on getting the damper rod out of the lower fork? Cap screw and damper rod both spin, even with a rattle gun.

    

2Back to top Go down   Removing fork damper rods Empty Re: Removing fork damper rods Mon May 02, 2011 4:42 am

charlie99

charlie99
VIP
VIP
i have also experienced that .....best i could do was to tap the bolt on the bottom with a straight piece of soft metal ...(a few times ) to loosen the thread ,,,,then to apply downward presure on the forks to keep help the piston engaged to the bottom of the fork tubes .

good luck !!!!


__________________________________________________
cheezy grin whilst riding, kinda bloke ....oh the joy !!!! ...... ( brick aviator )

'86 K100 RT..#0090401 ..."Gerty" ( Gertrude Von Clickandshift ) --------O%ORemoving fork damper rods Au-log10

'86 k100 rs.. #######..  "Fred " (f(rame) red ) ( Fredrick leichtundschnell ) - -
bits and pieces from many kind friends across the k100 world ...with many thanks ..
    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum